presshas.blogg.se - How to create a usb virtual port

#How to create a usb virtual port how to
#How to create a usb virtual port serial

If vSPC is used as an intermediate step to access all virtual machines through a single IP address, select Use Virtual Serial Port Concentrator and enter the vSPC URI location.

The URI is the remote end of the serial port to which the virtual machine's serial port should connect.

To have the virtual machine initiate a connection to another host, select Client.

Ethernet, integrated Wi-Fi, a suitable Epson print server or Windows printer.

To have the virtual machine monitor incoming connections from other hosts, select Server. The Epson printer must be used via a Parallel, a USB, or a network interface (e.g.

Connect the UART on the development board to your PC (you might need an USB to serial RS232. To connect through a remote network, select Use network. Hardware Setup Verify all jumper settings on the target hardware.

Select the Near end and Far end of the pipe from the drop-down menus.

Enter a name for the pipe in the Pipe Name field.

Select this option to set a direct connection between two virtual machines or a connection between a virtual machine and an application on the host computer. Select the serial port from the drop-down menu.

Select this option to have the virtual machine use a physical serial port on the host computer. To select an output file to connect to the serial port, click Browse.

#How to create a usb virtual port how to

How to Install Connect the device to a spare USB port on your PC. Download the latest available CDM drivers from the FTDI web site and unzip them to a location on your PC. It allows the USB device to appear as a COM port to be used with a terminal.

Select this option to send output from the virtual serial port to a file on the host computer. The particular driver one needs is Virtual COM Port, or VCP. From the New Serial port drop-down menu, select a connection type.Application software can access the USB device in. The following picture shows an exemplary connection of the development board and the USB Host Computer. This example demonstrates a bridge between a Virtual COM Port on the USB Host Computer and an UART port on the evaluation board. The new serial port appears at the bottom of the device list. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. The Communication Device Class (CDC) is used for implementing virtual communication ports.